how to make cannabis hash

How To Make Cannabis Hash

Hash is a distilled form of marijuana that is commonly smoked in pipes, joints, hookahs, and bongs. Hash is commonly made by extracting trichomes (crystals and resin) from dried cannabis flowers. Once these trichomes are collected, they are compressed with pressure and heat between various forms like cakes or balls, following the consistency that is either paste-like or solid. Together with coming in various forms, hash could vary in color, having reddish-brown to black, dark yellow, and regular marijuana-green. 

In this article, we will talk about how to make cannabis hash and everything about hash. 

Where to Buy Marijuana Seeds for Hash?

There’s many ways of consuming and enjoying cannabis. Aside from using a dab, eating edibles, and rolling a joint, hash is another famous form of consuming marijuana. Apart from asking where to buy cannabis seeds, users also ask how to make hash with cannabis cuttings and other marijuana forms. The well-known seed banks in the world are found in nations where marijuana is less limited like the Netherlands, Spain, and the UK. Seed banks are found in their countries and offer a massive range of cannabis seeds strains from various breeders.

This video will show you How to Make Marijuana Hash (Step-By-Step)

How do you smoke hash?

Normally, it is being used orally, either as infused into beverages like the traditional Indian drink bhang or being just as solid.  Hash might be consumers in a number of ways. It can also be smoked, either on its own or as a method to acquaintance traditional marijuana flowers. 

Several variants of hash that have the ability to melt might also be vaporized on a hot surface, called dabbing. Once dabbing hash, screens are sometimes used because of the fact that several resins leave carbon excess and would not melt totally, or at all. At the other end of the scale are high-quality hash oils, like full melt dry strain and full melt ice water hash, that have the capability to melt totally into a nail, leaving zero excess. 

How Much THC Does Hash Have?

Hash is a marijuana extract, it carries more terpenes and cannabinoids, the mixtures responsible for marijuana’s flavor, aroma, and psychoactive experience, therefore, delivering a much higher punch than dried flowers. 

For a regular hash, THC level ranges from 20-50%, based on the cannabis strain and the expertise of the producer. And for special types such as bubbly hash,  THC levels could reach around 60%. This indicates once it is compared to dried flowers, hash could have more than 3-6 THC. Considering that dried flowers have around 10-20%.

Procedure in Making Hash

Below we will show you the 5 easiest methods on how to make hash with leaves. Always remember that the whole plant carries trichomes. 


You will need:

  • Non-dried marijuana buds. Don’t use dried marijuana trimmings.
  • Very clean hands.
  1. Before you begin, always make sure to clean your hands. For the most organic outcomes possible, use non-residual, unscented hand soap.
  2. Take a marijuana bud in your hand and make sure to detach any stems or leaves.
  3. Put the bud in between your two palms and gently start rolling the bud in a circular motion. Don’t put in too much force to the bud to prevent contaminating your hash with plant grains
  4. You must start to see a wide, black resin forming on the insides of your fingers and hands. It is essentially charas or hash. Scrape this hash into a clean side and pin it together to make a ball or small block.


You will need:

  • Marijuana trimmings
  • Baking paper
  • Silkscreen
  • A credit card
  1. Put a sheet of baking paper on a clean side, like your kitchen table. The sheet of paper must be a bit bigger than your silkscreen.
  2. Put your silkscreen over the piece of baking paper. Next, put your marijuana trimmings over the silkscreen, assuring to dismantle any large pieces.
  3. Use your hands to gently shift the trimmings around the silkscreen to help break up the trichomes from the plant material. You must see a small amount of kief setting up on the baking paper under the screen.
  4. Keep shifting the trimmings around the screen until the kief under the sieve amounts to around 10-20% of the total amount of trimmings you utilize. For instance, if you utilize 100grams of trimmings, you must be looking to make around 10gram of kief.
  5. When you are done screening your trimmings, it is the moment to collect your kief and pin it. We suggest using a credit card to form a nice bundle on the sheet of baking paper and simply pinning it into a fine hash block.


You will need:

  • Marijuana trimmings
  • A blender
  • Ice water
  • An extra-large glass jar
  • A coffee filter
  • Silkscreen
  1. Put your trimmings in a blender along with adequate water to coat them and a lot of ice. Mix for around one minute to make a thick, frothy blend.
  2. Strain the blend through the silkscreen inside the glass jar. Allow the mixture to clear up for around 30 minutes.
  3. You must see a small amount of sediment under the jar. This is basically hash.
  4. Pour off around 2/3 of the water into the jar. Make sure to pour gently to keep away from losing any of the hash underneath.
  5. Fill up the jar over with more ice water and allow the blend to clear up for another 3 minutes. When the blend has cleared up, repeat steps 4 and 5 once more before shifting on to step 7. This would help to break up as much plant material from your hash as possible.
  6. Drain off as much water from your jar as possible without losing any of the hash. Then drain the residual blend through the coffee filter and press gently to remove any residue water.
  7. The extra damp, cold mass is a hash. And now all you need to do is dry it and enjoy it in a bong or joint.


You will need:

  • Marijuana mesh bags (like the Ice-O-Lator, that comes with different sized mesh)
  • Marijuana trimmings
  • Ice water
  • 2 buckets
  • A wooden spoon
  1. Put your marijuana trim in a bucket with a lot of ice. Next, add adequate water to fully overflow the marijuana.
  2. Mix the blend for around 15 minutes. The cold water would create the trichomes brittle, while the slight blending would allow them to come off into the water.
  3. Place your mesh bags in the other bucket. The Ice-O-Lator bags comes in 4 various sizes. Put them into the bucket, waving the tops of the bags at the top of the rim of the bucket then securing them. The first bag you place inside the bucket in arising order (starting with the finest mesh).
  4. Gently pour the marijuana blend inside the bucket with the mesh bags. Let the blend sit and drain for around 15 minutes.
  5. Detach the first mesh bag from the bucket. Clutch it at the top of the bucket and pour more ice water over the blend to wash out any excess trichomes. Shake the bag gently, let it drain, and then place it aside.
  6. Repeat this procedure with each bag. All the following bags would contain a hash of varying degrees of quality; the highest quality hash would be in the last bag you remove. The following bags would carry a hash of slightly lower quality.
  7. Detach the hash from every bag and let it dry individually on a non-stick side. Don’t blend the various qualities of hash. When dry, pin each pile of hash into a block or ball.


You will need:

  • Marijuana trim, ideally frozen
  • A mechanical drum

Simply put your trimmings into the drum and hit the on a switch. The drum would spin, causing the marijuana to rub against its silkscreen to create a highly potent kief.


Hash is easy to use as you could either generate smoke or include it as a food ingredient. Nevertheless, you should consider the dose and the type of has made by yourself or buy online. Has is normally smoked with herbal cannabis or tobacco. It’s broken into small pieces, placed on a metallic tray or spoon or heat is put with a lighter, granting it to break and become softer for mixing in this cannabis, either for smoking in a vape, joint, or bong, or combined with foods like butter and brownies. The aroma and taste of your cannabis mixed with the great dosage of THC content you extract by your hash. 

Once consuming hash, you need to ensure you are using the right dosage and a premium quality product. With the right information, you are ready to enjoy pain-relieving medication that has been for centuries to relieve pain and give relief. This is how to make cannabis hash.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.